KWIKFIX LED Down Lighting Kits - HOLE CUT OUT 55mm - 70mm - With Retaining Springs & Anti Theft Strap

Product Description

KWIKFIX LED Downlighting Kit - 55mm - 70mm Hole Cut Out- With Retaining Springs & Anti Theft Strap

EASY TO INSTALL:
Prior to despatch, all our kits are fully tested and pre-wired. All you need to do is fit the lamps into the ceiling. Find a suitable place to mount the mains/emergency unit, connect up the battery and find a 230V power supply.

These lamps are suitable for a 55-70mm ceiling cut out.
Lamp depth 35mm -The lamps have a set of retaining springs and an anti tamper-proof strap.

Aluminium Nickel Plated extension rings are available to allow these lamps to fit into holes up to 84mm. We stock cool white light lamps. Warm White available by special request.

For full product specification and installation manual please use the pdf file below.

TECHNICAL INFORMATION:

Electrical Characteristics

Nominal power consumption 2,7W
Rated power consumption 2,7W
Nominal Operating Voltage 210-240V
Lamp equivalent 50W
Rated efficacy 145 lm/W
Operating frequency 50 - 60Hz
Operating current 0,086Α
Power Factor 0,99
CRI 75

Lighting characteristics

Beam angle 120 °
Number of LEDs 48
Nominal luminous flux (6000K) 391lm
Rated luminous flux (6000K) 391lm
Color Temperature 6000k (Cool White)
Rated Lifetime: 50.000 hrs

IMPORTANT NOTE
These lighting kits must be wired directly into a constant 230V supply. Some control systems have power saving devices, you must not connect to systems of this nature.